Telstra Commander i, Руководство по обслуживанию

Страница: 141 / 195

Programming
Commander i System User Guide - Issue 2
•
Press [RLS] three times to exit.
11a Serial Number
A remote maintenance serial number may be allocated to the system by
the Telstra Commander Remote Access Centre.
To Display The Remote Maintenance Serial Number:
•
Press [i] to enter programming mode.
•
Dial 04 to go to the Administration menu.
•
Press [i] to confirm.
•
Enter four digit Administration password
and press [i ].
If the password is incorrect, the Admin menu is displayed. Press [i]
and re-enter correct password or press [RLS] to exit.
•
Dial 11 to go to the Serial Number
option.
•
Press [RLS] three times to exit.
12a Hold Timer
The length of time a call is on common hold or exclusive hold before the
call rings back at the holding station is programmable.
There are four possible settings:
1 30 seconds
2 60 second
3 90 seconds
4 120 seconds
To Set The Hold Timer (Day Or Night):
•
Press [i] to enter programming mode.
•
Dial 04 to go to the Administration menu.
•
Press [i] to confirm.
•
Enter four digit Administration
password and press [i].
If the password is incorrect, the Admin menu is displayed. Press [i]
and re-enter correct password or press [RLS] to exit.
•
Dial 12 to go to the Hold
Timer option.
•
Press [i] to confirm.
•
Enter the appropriate setting for the
system.
•
Press [i] once to confirm, twice to re-enter or [RLS] to cancel.
•
Press [RLS] three times to exit.
01: Repertory
04: Admin
Pass:
01aSet Time: 16:24
11aSerial #47218432
01: Repertory
04: Admin
Pass:
01aSet Time:16:24
>
12aHold Timer 2D
>3
Page 6-20 Page 6-21