Sun Microsystems Netra X4200 M2, Руководство по обслуживанию

Страница: 64 / 222

50 Netra X4200 M2 Server Service Manual • May 2007
■
Flex circuit
■
Ribbon cable to power distribution board (PDB)
4. Move the cables as far out of the way as possible.
5. Loosen both the screw at the back of the mass storage assembly and the screw
at the front of the chassis (
FIGURE 3-26
).
FIGURE 3-26
Loosening the Mass Storage Assembly Screws
Note – The screws are captive and cannot be completely removed.
6. Slide the mass storage assembly back, pivot the back end up, and lift the
assembly out of the chassis (
FIGURE 3-27
).
Caution – As you remove the assembly, be careful that the flex cable does not get
caught on the flex circuit or the PDB ribbon cable.