Sun Microsystems Netra X4200 M2, Руководство по обслуживанию

Страница: 189 / 222

Appendix E Serial Attached SCSI BIOS Configuration Utility 173
If the Logical Block Addresses (LBAs) can be reassigned, or need to be reassigned,
the following prompt appears:
Reassign the block?
(Yes, No, All, nonE, Cancel)
The reassignment options are as follows:
■
Yes : Reassign only this block. If another block needs to be reassigned in the
future, display the prompt again.
■
No : Do not reassign this block. If another block needs to be reassigned in the
future, display the prompt again.
■
All : Reassign the current block, and automatically reassign other blocks that need
it, without displaying the prompt again.
■
None
: Do not reassign the current block, and do not automatically reassign any
other blocks that need it. Do not display the prompt again.
■
Cancel : Do not reassign anything, and stop the verification process.
Advanced Adapter Properties Screen
The Advanced Adapter Properties screen (see
FIGURE E-11
) allows you to view and
modify infrequently accessed adapter settings.
TABLE E-8
describes the fields of the
screen.
The Advanced Adapter Properties screen provides access to advanced Device
Properties and PHY Properties. To modify the Link Error Settings Threshold Count
and Threshold Time, press Enter while the cursor is on the desired field and type the
new value.
********************************************************************************
* LSI Logic MPT Setup Utility v6.02.00.00 (2005.07.08) *
* Advanced Adapter Properties -- SAS1064 *
* *
* IRQ 0B *
* NVM Yes *
* IO Port Address A800 *
* Chip Revision ID 02 *
Serial Number The serial number of this device.
Elapsed Time The total time elapsed since the Format or Verify operation started.
Percent Complete Graphical status bar that shows the current completion status of the
operation.
TABLE E-7
Device Verify Screen Field Descriptions (Continued)
Field Description