Sun Microsystems Netra X4200 M2, Руководство по обслуживанию

Страница: 139 / 222

Appendix B BIOS POST Codes 123
4. On the Boot Settings Configuration screen, there are several options that you
can enable or disable:
■
Quick Boot : This option is disabled by default. If you enable this, the BIOS
skips certain tests while booting, such as the extensive memory test. This
decreases the time it takes for the system to boot.
■
System Configuration Display : This option is disabled by default. If you
enable this, the system configuration screen is displayed before booting begins.
■
Quiet Boot : This option is disabled by default. If you enable this, the Sun
Microsystems logo is displayed instead of POST codes.
■
Language : This option is reserved for future use. Do not change.
■
Add On ROM Display Mode : This option is set to Force BIOS by default. This
option has effect only if you have also enabled the Quiet Boot option, but it
controls whether output from the Option ROM is displayed. The two settings
for this option are as follows:
■
Force BIOS: Remove the Sun logo and display Option ROM output.
■
Keep Current: Do not remove the Sun logo. The Option ROM output is not
displayed.
■
Boot Num-Lock : This option is On by default (keyboard Num-Lock is turned
on during boot). If you set this to off, the keyboard Num-Lock is not turned on
during boot.
■
Wait for F1 if Error : This option is disabled by default. If you enable this, the
system will pause if an error is found during POST and will only resume when
you press the F1 key.
■
Interrupt 19 Capture : This option is reserved for future use. Do not change.
■
Default Boot Order : The letters in the brackets represent the boot devices. To
see the letters defined, position your cursor over the field and read the
definition in the right side of the screen.