Sun Microsystems Netra X4200 M2, Руководство по обслуживанию

Страница: 195 / 222

Appendix E Serial Attached SCSI BIOS Configuration Utility 179
PHY Properties Screen
The PHY Properties screen (
FIGURE E-13
) allows you to view and modify PHY-
specific settings.
TABLE E-10
describes the fields of the screen.
Note –
The Link Error Settings values on this screen only display the current values
for this PHY and cannot be modified. To modify the Threshold values, return to the
Advanced Adapter Properties screen.
LUNs to Scan for
Other Devices Controls LUN scans for all devices other than the following:
• SCSI Device Type 00h - Direct Access
• SCSI Device Type 01h - Sequential Access
• SCSI Device Type 04h - Write Once
• SCSI Device Type 05h - CD-ROM
• SCSI Device Type 07h - Optical
• SCSI Device Type 0Eh - Simplified Direct Access
LUN 0 Only: Scan only LUN 0.
All: Scan all LUNs.
Removable Media
Support • None : Install no INT 13H interface for any Direct Access
removable media devices.
• Boot Device Only : Install INT 13H interface for a Direct Access
removable media device if, and only if, media is present in the
device at the time of BIOS initialization and either:
• BBS System : The device is selected as the boot device. (Refer to
the BIOS Boot Specification for a description of BBS.)
• Non-BBS System : The device is set up as the boot device. The
adapter to which the device is connected is specified as the first
adapter (i.e., 0) in the Boot Adapter List. The device is specified as
the first device in the adapter’s device scan order list.
• With Media Installed : Install INT 13H interfaces for Direct Access
Removable Media devices if media is present in the device at the
time of BIOS initialization.
Restore Defaults Press Enter to restore the default values for all items on this screen.
TABLE E-9
Advanced Device Properties Screen Field Descriptions (Continued)
Field Description