Sun Microsystems Netra X4200 M2, Руководство по обслуживанию

Страница: 35 / 222

Chapter 2 Powering On and Configuring BIOS Settings 21
8. Return the server to main power mode by using a ballpoint pen or other stylus
to press and release the recessed Power button on the front panel.
Note –
You must allow the entire server, not just the SP, to reboot to main power
mode to complete the password reset. This is because the state of the J12 jumper
cannot be determined without the host CPU running. Wait until the end of POST,
when you see the
CMOS password cleared by jumper
message, after which
both the BIOS and SP passwords are reset.
■
The ILOM SP password is reset to the default,
changeme
.
■
The BIOS password is also reset by a separate operation performed by the
BIOS when it discovers the presence of the J12 jumper. The BIOS password is
not reset to
changeme
, it is removed so that there is no longer a BIOS
password set. If you had a BIOS password set, you are no longer prompted for
one.
9. Log in to the ILOM web GUI using
root
as the user name and
changeme
as
the password.
Refer to the Integrated Lights Out Manager Administration Guide (819-1160).
10. Change the default password to a password of your choice.
11. Repeat Step 1 through Step 8 to remove the J12 jumper. Remove the jumper in
Step 5 rather than inserting it.
Note –
If you do not remove the J12 jumper, the ILOM SP and BIOS passwords will
be reset every time you power-cycle the server.