Sun Microsystems Netra X4200 M2, Руководство по обслуживанию

Страница: 109 / 222

Chapter 3 Maintaining the Netra X4200 M2 Server 95
FIGURE 3-69
Installing the PCI-E Card Into the PCI Tray
6. Tighten the captive PCI-E card securing screw and adjust the green retention
latch.
7. Perform the following tasks to bring the server back online:
■
“Installing the PCI Tray” on page 108
■
“Installing the Top Cover” on page 126
■
“Removing Antistatic Measures” on page 127
■
“Reinstalling the Server Chassis in the Rack” on page 127
■
“Reconnecting Cables to the Server” on page 130
■
“Powering On the Server” on page 131
Replacing a Power Supply
The server’s redundant hot-pluggable power supplies enable you to remove and
replace a power supply without shutting the server down provided that the other
power supply is online and working.
Caution –
It is a violation of UL rules to add a DC power supply into a chassis that
does not have the DC label indicating the correct safety information. (There is no
functional difference that would prevent this, aside from the DC label.)
Caution –
Do not mix AC and DC power supplies in the same server.