Sun Microsystems Netra X4200 M2, Руководство по обслуживанию

Страница: 56 / 222

42 Netra X4200 M2 Server Service Manual • May 2007
5. Consider your next step:
■
If you removed the DVD drive as part of another procedure, return to that
procedure.
■
Otherwise, continue to “Installing the DVD Drive” on page 42 .
Installing the DVD Drive
1. Remove the replacement DVD drive from its packaging and place the drive on
an antistatic mat.
2. Hold the release tab to the left and insert the DVD drive into the mass storage
assembly (
FIGURE 3-15
).
FIGURE 3-15
Inserting the DVD Drive
3. Press the DVD drive in until it seats and release the tab. Ensure that the DVD
device fully seats into the mating DVD board.
4. Close the bezel.
5. Consider your next step:
■
If you installed the DVD drive as part of another procedure, return to that
procedure.
■
Otherwise, perform the following tasks to bring the server back online:
■
“Installing the Top Cover” on page 126
■
“Removing Antistatic Measures” on page 127
■
“Reinstalling the Server Chassis in the Rack” on page 127