Sun Microsystems Netra X4200 M2, Руководство по обслуживанию

Страница: 51 / 222

Chapter 3 Maintaining the Netra X4200 M2 Server 37
FIGURE 3-9
Ribbon Cable and Goldfinger Board Locations on the Motherboard
Replaceable Component Procedures
Note – All FRUs are customer-replaceable.
Supported components and their part numbers are subject to change over time. For
the most up-to-date list of replaceable components for these servers, see the
following URL:
http://sunsolve.sun.com/handbook_pub/Systems/
1. Click on the name and model of your server.
2. On the product page that opens for the server, click on
Full Components
List
for the list of components.
Caution – Before handling components, attach an ESD wrist strap to the button-
snap grounding post inside the chassis just behind the mass storage assembly (see
FIGURE 3-10
for the location). The system’s printed circuit boards and hard disk
drives contain components that are extremely sensitive to static electricity.
Unused
Unused
PCI-E0 (J2)
PCI-E1 (J18)
PCI-E3 (J21)