Sun Microsystems Netra X4200 M2, Руководство по обслуживанию

Страница: 186 / 222

170 Netra X4200 M2 Server Service Manual • May 2007
FIGURE E-8
SAS Topology Screen 5, Initiator Capabilities
Device Properties Screen
The Device Properties screen displays information about a specific device, as shown
in
FIGURE E-9
. To access this screen, press Alt+D on the SAS Topology screen when
the cursor is on the Device Identifier field of a device.
Press
Alt+N
or
Alt+P
at any time while on this screen to cycle to the
next or
previous device.
********************************************************************************
* LSI Logic MPT Setup Utility v6.02.00.00 (2005.07.08) *
* Device Properties -- SAS1064 *
* *
* *
TABLE E-5
SAS Topology Screens Field Descriptions
Field Description
Device Identifier The ASCII device identifier string extracted from the device’s
inquiry data.
Discovery Status The status of SAS topology discovery on this directly attached PHY
or on an expander. This field is only an indicator of an error being
encountered. For specific details and the error value, see the
Expander Properties page for expanders and the PHY Properties
page for directly attached PHYs.
Device Info Indicates whether a device is SAS or SATA, and whether the device
has been selected as the boot device.
Negotiated Link
Speed The negotiated link speed for this PHY, in Gbits/s. This field also
indicates whether the PHY has been disabled.
Maximum Link
Speed The maximum hardware link rate possible for this PHY, in Gbits/s.
Target Capabilities The target capabilities for this device. The following acronyms are
used:
• SSP - Serial SCSI Protocol
• SMP - Serial Management Protocol
Initiator Capabilities The initiator capabilities for this device. The following acronyms are
used:
• SSP - Serial SCSI Protocol
• SMP - Serial Management Protocol