Sonifex COURIER, Руководство пользователя

Страница: 97 / 218

Chapter 7 - Editing
Courier User Handbook 7-17
Note : Playing a Playlist does not affect the active Playlist unless the Edit
button is pressed. In this case, a prompt to save the current active Playlist is
displayed. The Playlist loaded in play then becomes active and is loaded into
the Playlist Compile screen (See section 7.9 for further information on the
Playlist Compile screen).
7.8.6. Deletion or renaming of a cut that is also
included in a Playlist
If you delete or rename a cut in the Cut-List Mode , which is included in part of a
Playlist, you will not be able to fully play the Playlist .edl file. This is because the
Playlist is a series of references to the actual audio files, so if you rename them, or
remove them from the disk, the Playlist will not be able to refer to them or play
them.
You can still play the Playlist that you have created but when it needs to play the
deleted cut, the Courier will skip over the missing audio file and continue to play
the cut following it.
7.8.7. Checking the contents of a Playlist
Normally, you need to enter the Playlist Compile Mode to see the list of cuts
contained in a Playlist. However, for any .edl, you can view the contents of it in the
Properties screen.
In the Cut-List Mode , highlight the Playlist that you wish to view and press the
ENTER button. At the bottom of the Playlist properties screen is a listing of which
audio files are referred to in the Playlist.
Press the ENTER button again to return to the Cut-List Mode.