Sonifex COURIER, Руководство пользователя

Страница: 67 / 218

Chapter 5 - Recording
Courier User Handbook 5-19
Note that only four of the lines can be displayed at any one time. There are two
sections to the [Limiter Level] option, so you will see two ticks placed on the whole
list. The first set of options are actually the level to which the limiter will operate
and vary between [None], for no limiting (even when the LIMITER L & R switch
is set to ON ) and limiting from [+2dB] to [+10dB], in 2dB steps. Select the limit
level that you require by pressing the ENTER key.
Further down the list are two other options :
[Dual Mono] - If this is selected, left and right channels will be limited
independently at the level set above. This should be used if you have separate
sources for the left and right channels.
[Link] - When this is selected, if either left or right channels need to be limited,
then both channels are limited by the same amount. This should be used for stereo
input signals, so that the stereo image is not altered by the limiting (For example, if
you had a stereo source and used [Dual Mono] for limiting, you could have the
situation where one channel only is being limited, which would detrimentally affect
the stereo imaging of the signal).
Note : If both left and right signals are [Link]ed and above the limit level, the
highest value is picked and both signals are then limited by that amount.
Select either [Dual Mono] or [Link] depending on the number and type of sources
that you will be recording and then choose [Close] to return to the previous menu.