Sonifex COURIER, Руководство пользователя

Страница: 84 / 218

Chapter 7 - Editing
7-4 Courier User Handbook
7.3. Entering the Edit Mode
In the Cut-List Mode , highlight the cut that you would like to edit and press the
EDIT key on the top of the Courier :
Press the EDIT button.
For some types of recording, such as linear .wav files, a waveform file will need to
be generated, which may take some time to display. You can exit the waveform
generation at any time by pressing and holding the EDIT key. A count-up indicates
the percentage complete :
Alternatively, you can record files without the waveform data, so that even linear cuts
can be edited instantly. In this case, the waveform is shown as a length of tape.
The Edit Mode screen opens to show :
On the display is a central cursor with a dark triangle at the bottom, together with
the cut waveform to the right of the cursor. The horizontal line running from left to
right across the screen represents a silence point, with left channel information
above the line and right channel information below it. Mono cuts have the same
information shown above and below the line.
The audio waveform moves horizontally along the display with the cursor always
remaining stationary.
Along the bottom of the display is a timer showing the time of the current edit
position, from the start of the cut, in Hours:Minutes:Seconds format. The name of
the cut being edited will appear in the bottom right hand corner whenever the
waveform is stationary.
Note : Pressing and holding the EDIT key again will exit the Edit Mode .