Sonifex COURIER, Руководство пользователя

Страница: 51 / 218

Chapter 5 - Recording
Courier User Handbook 5-3
•
A count-up of the cut duration in Hours:Minutes:Seconds format.
•
A four bar battery indicator (four bars = full, no bars = empty, x = no battery).
•
The cut title, without the three letter extension.
5.2. Pausing and stopping a recording
To pause the recording (without creating another cut), simply slide the RECORD
PAUSE switch to the right. The machine will go into
Record Pause Mode and the
display will change to show :
Metering and battery indications are still active and you can press the MENU
button to access record options, for example to change the battery type, or to start
recording automatically once an audio input is sensed.
Whenever the RECORD PAUSE switch is to the right, the machine is in Record
Pause Mode , regardless of the position of the RECORD switch. If you don’t use
the RECORD PAUSE switch at all, each time you make a recording, the Courier
will generate a new cut. Using the RECORD PAUSE switch while recording is a
useful way of putting many continuous clips onto one cut.
To stop the recording, push both RECORD and RECORD PAUSE switches to the left.
The screen will briefly show “Updating Disk Structures” whilst the final recording
information is written to disk, and the Cut-List will re-appear.
Note : Don’t use the RECORD switch while the Courier is “Updating Disk
Structures” - it may miss the recording
.
A Mark will be place on the cut near to the pause point – due to the nature of the
buffering it may be 2-3 pixels earlier than the actual pause.
5.3. Automatically starting a recording
The Courier can be configured to automatically begin a recording when the
machine senses audio at the inputs. This can be useful if you want to begin a
recording when you switch your microphone on, for example. Whilst in the
Record
Pause Mode , press the MENU button to show :