SoftBank 911T, Руководство пользователя

Страница: 357 / 392

23-7
23
S! F
eliCa
Using Remote Lock to Lock the IC Card
Lock the IC card from a remote location.
● Before performing these procedures, first configure Mail Lock (page 23-5)
or Call Lock (page 23-5) settings and set Remote Lock to
ON
(page 23-6).
Using Mail Lock to Lock the IC Card
1
Create a message with a preset password for the
subject, and send the message
● Do not enter anything for any of the other fi elds of the message.
IC Card Lock will turn on when the message is received.
If there is a lock notifi cation address (page 23-6) specifi ed, a
message will be sent to the address informing the recipient that IC
Card Lock was turned on.
7 If the handset is unable to receive mail for some reason, IC Card Lock
will not be turned on even if you send a Mail Lock message.
Note
Releasing Remote Lock
Set IC Card Lock (page 23-4) to
OFF
to release Remote Lock.
Using Call Lock to Lock the IC Card
1
Place a call to the handset from one of the preset
phone numbers
2
Hang up the phone
●
Repeat the procedure until you reach the number of times you preset
for Call Lock settings (page 23-5) within three minutes. Each of the
calls must be unanswered.
7
The current incoming call count is cleared (becomes zero) whenever any
one of the following occurs.
・
If a call is received from another preset phone number
・ If a call placed to the handset is answered
・ If the handset is turned off
・ If the number of incoming calls does not reach the preset number
within three minutes
7 If Call Lock is performed while a video call is in progress, IC Card Lock
will turn on but there will be no message to tell that the IC card has
been locked.
7
Call Lock cannot be performed while a voice call is in progress and Call
Waiting (page 16-5) is set to
OFF
.
Note
7 When the number of calls reached to the preset number, a message
informing that the IC card has been locked plays.
Tip
911T̲Web̲070320.indb 23-7 911T̲Web̲070320.indb 23-7 07.4.10 5:05:32 PM 07.4.10 5:05:32 PM