SMC Networks LECSB Series, Руководство по эксплуатации

Страница: 7 / 423

A - 6
CAUTION
When you keep or use it, please fulfill the following environmental conditions.
Item
Environmental conditions
Driver Servo motor
Ambient
temperature
In
operation [ ] 0 to 55 (non-freezing) 0 to 40 (non-freezing)
[ ] 32 to 131 (non-freezing) 32 to 104 (non-freezing)
In storage
[ ] 20 to 65 (non-freezing) 15 to 70 (non-freezing)
[ ] 4 to 149 (non-freezing) 5 to 158 (non-freezing)
Ambient
humidity
In operation 90%RH or less (non-condensing) 80%RH or less (non-condensing)
In storage 90%RH or less (non-condensing)
Ambience Indoors (no direct sunlight) Free from corrosive gas, flammable gas, oil mist, dust and dirt
Altitude Max. 1000m (3280 ft) above sea level
(Note)
Vibration
[m/s
2
]
5.9 or less at 10 to
55Hz (directions of
X, Y and Z axes)
LECS
□□
-S5
LECS
□□
-S7
LECS
□□
-S8
series
X, Y: 49 m/s
2
Note. Except the servo motor with reduction gear.
When the equipment has been stored for an extended period of time, contact your local sales office.
(2) Wiring
CAUTION
Wire the equipment correctly and securely. Otherwise, the servo motor may operate unexpectedly.
Do not install a power capacitor, surge absorber or radio noise filter (FR-BIF-(H) : Mitsubishi Electric
Corporation) between the servo motor and driver.
Connect the wires to the correct phase terminals (U, V, W) of the driver and servo motor.
Not doing so may cause unexpected operation.
Connect the servo motor power terminal (U, V, W) to the servo motor power input terminal (U, V, W)
directly. Do not let a magnetic contactor, etc. intervene.
U
Servo motor
M
V
W
U
V
W
Servo amplifier
(drive unit)
U
M
V
W
U
V
W
Servo motor
Servo amplifier
(drive unit)
Do not connect AC power directly to the servo motor. Otherwise, a fault may occur.
Driver
Driver