SMC Networks LECSB Series, Руководство по эксплуатации

Страница: 198 / 423

6 - 22
6. DISPLAY AND OPERATION SECTIONS
f) Pulse move distance unit selection
Select with the option buttons whether the moving distance set in c) is in the command
pulse unit or in the encoder pulse unit.
When the command input pulse unit is selected, the value, which is the set moving
distance multiplied by the electronic gear (
CMX
CDV
), will be the command value. When the
encoder pulse unit is selected, the moving distance is not multiplied by the electronic
gear.
g) Repeat operation
To perform the repeated operation, click the check box of "Make the repeated operation
valid". The next table shows the initial setting and the setting range of the repeated
operation.
Item Initial setting Setting range
Repeat pattern Fwd. rot.(CCW) Rev. rot. (CW)
Fwd. rot.(CCW) Rev. rot. (CW)
Fwd. rot.(CCW) Fwd. rot.(CCW)
Rev. rot. (CW) Fwd. rot.(CCW)
Rev. rot. (CW) Rev. rot. (CW)
Dwell time [s] 2.0 0.1 to 50.0
Number of repeats [times] 1 1 to 9999
To perform continuous operation with the repeat pattern and dwell time settings, which
are set by referring to the above table, click the check box of "Make the aging function
valid".
h) Forward/Reverse
Click the "Forward" button to rotate the servo motor in the forward rotation direction.
Click the "Reverse" button to rotate the servo motor in the reverse rotation direction.
i) Stop
Click the "Stop" button erase the remaining distance after the motor has stopped.
j) Forced Stop
Click the "Forced Stop" button motor stops suddenly.
k) Pause
Click the "Pause" button during servo motor rotation to temporarily stop the servo motor.
This button is valid during servo motor rotation.
(2) Status display
The status display can be monitored during positioning operation.