SMC Networks LECSB Series, Руководство по эксплуатации

Страница: 147 / 423

5 - 28
5. PARAMETERS
No. Symbol Name and function
Initial
value
Unit
Setting
range
Control mode
Position Speed Torque
PB26 *CDP Gain changing selection
Select the gain changing condition. (Refer to section 8.6.)
Gain changing selection
Under any of the following conditions, the gains
change on the basis of the parameter No.PB29 to
PB34 settings.
0: Invalid
1: Input device (Gain changing (CDP))
2: Command frequency (Parameter No.PB27
setting)
3: Droop pulse (Parameter No.PB27 setting)
4: Servo motor speed (Parameter No.PB27 setting)
0 0
Gain changing condition
0: Valid when the input device (gain changing
(CDP)) is ON, or valid when the value is equal
to or larger than the value set in parameter
No.PB27
1: Valid when the input device (gain changing
(CDP)) is OFF, or valid when the value is equal
to or smaller than the value set in parameter
No.PB27
0000h Refer to
name
and
function
column.