![background image](http://html1.mh-extra.com/html/safco/cs-i-150a/cs-i-150a_operation-and-maintenance_3253595072.webp)
CS-I User and Maintenance, R.2.8 ENG
Safco Systems Ltd-Via Isonzo 17/b-20090 Cesano Boscone-Milan-Italy
tel. +39 024504433 Fax +39 024504321 E-mail:[email protected] Web site: www.safcosys.it
72 of 109
6.3.
Connecting to a network
The CS-I can be connected to a network using the RS-485, CS-I is a slave node.
The connection can be done via a serial cable, as shown in Annex D, 9 pin connector
located on the present on the CS-I/P.
You can set the communications port unit in the menu of communications.
You must assign it a unique address on the net!
The setting "Ser.Direct." should be set to none or PRN
Through optional parallel expansion to the CS-I/P, you can operate the unit into a field bus
with the complete visibility.