![background image](http://html1.mh-extra.com/html/safco/cs-i-150a/cs-i-150a_operation-and-maintenance_3253595047.webp)
CS-I User and Maintenance, R.2.8 ENG
Safco Systems Ltd-Via Isonzo 17/b-20090 Cesano Boscone-Milan-Italy
tel. +39 024504433 Fax +39 024504321 E-mail:[email protected] Web site: www.safcosys.it
47 of 109
N° Bad spots
Range value:
from 0 to 9
Default value
0
In spot mode, with the function of quality checking enabled, it allows the entry of the
maximum permitted number of consecutive defective welds, before the warning signal and
block the start cycle.
Exceeding the limits of tolerance is reported with the activation output (OUT OF RANGE)
and with a message on the display.
The count of defective weld is reset with occurrence of welding within the set limits.
In Seam mode the number of consecutive defective welds is considered inside the running
cycle, and therefore current change are also counted as defects.
Program IC1
Range value:
from 0 to 63
Default value
0
Allows the assignment of the program to be executed with start cycle IC1.
Function is active when the selection mode is set to on.
Function on IC1 is disabled in Seam mode.
Program IC2
Range value:
from 0 to 63
Default value
0
Allows the assignment of the program to be executed with start cycle IC2.
Function is active when the selection mode is set on.
Function on IC2 is disabled in Seam mode.
Seq. Start Program
Range value:
from 0 to 63
Default value
0
Represents the first program to run in sequential mode, and also that will run after the last
one selected.
Function is active when the selection mode is on Seq.
Parameter has no effect in Seam mode
Seq. End Program
Range value:
from 0 to 63
Default value
0
Represents the program of arrival the last one before the recycling in sequential mode
occurs. Function is active when the selection mode is on Seq.
Parameter has no effect in Seam weld mode
VE Input(VOLTAGE ELECTRODES)
Range
value:
NO,YES
Default value:
NO
This parameter enables the reading of the voltage electrodes through the analog channel
charge.