Manual - TC.P Quadro
Commissioning
2016-08-05
57/330
V04.52
3
Sense activation/deactivation in the TopControl application
The sense function can be found on the
<CONFIG> -1-
tab, and the pa-
rameters defined in the “Voltage sensing”
-2-
group.
The entire function is activated/deactivated via the “Use sense input”
-3-
check box.
For information on the significance of the parameters see chapter
6.4.7.5, page 223.
1
2
3
Fig. 20
Configuration of the sense function in TopControl.
Sense actual value indication
On the activation of the sense function, the following indications alter-
nate:
<CONTROL>
tab
The labels “Output Voltage”
-1-
and “Output Power”
-1-
change
to “Sense Voltage”
-2-
and “Sense Power”
-2-
2
1
Fig. 21
Indication change between output voltage and sense voltage.
<STATUS>
-3-
tab
Along with the indication of the output values
-1-
the sense actual
values
-2-
are also displayed.
1
2
3
Fig. 22
Indication of the output values.
