Manual - TC.P Quadro
TopControl application
2016-08-05
191/330
V04.52
6
Saving/loading function sequences
via the flash memory in the TopCon power supply
The window in Fig. 112, 191 appears on saving a function sequence.
The window for loading has a similar structure.
10
1
9
3
5
7
6
8
2
4
Fig. 112
Opening the “Store Function Sequence” or “Load Function
Sequence” window.
<FUNCGEN> tab
– “Store/Load Function Sequence” window
1
Available Function Sequences,
list
The list contains all the “function sequences” saved in the non-volatile memory
in the TopCon power supply.
The list can be refreshed using the button
-2-
.
2
<Refresh List>,
button
Refreshes the list
-1-
with the data from the non-volatile memory (flash) on the
TopCon power supply.
3
<Delete>,
button
Permanently deletes an entry from the non-volatile memory (flash)
on the
TopCon power supply after a confirmation prompt.
4
<remove autoload>/<set for autoload>,
buttons
Function sequences can be started automatically on “Startup” of the TopCon
power supply.
<set for autoload> has the following effect:
Entry marked in blue in the list
-1-
is labelled with: “(*)”
in the “Seq.Nr” column“.
<remove autoload> has the following effect:
The Autoload label “(*)” is removed from the list entry.
The function sequence is no longer loaded automatically
on switching on.
The changes made must be made known to the TopCon power supply. On the
<CONTROL> tab click the “Store Settings” button, see Fig. 107, page 184.
The table is continued overleaf.
