Operating Manual
Page 70 / 116
Copyright © REA Elektronik
REA ScanCheck 3n
V 1.2.0 24/02/2020
REA
VERIFIER
After pressing the
<5>
button, it is possible to manually enter a number
sequence from 1 -99999999999 with the number buttons on the following
screen “Article selection” and accept this with <Store>.
The number sequence entered is then immediately compared with the code
contents in the article database32 files loaded in the device.
If the number sequence entered can be found in the article database, the
intended data contents are shown on the display.
If the number sequence entered cannot be found in the article database, the
error message “article not found” is issued
Measuring aperture selection function
: Button
<6>
Before performing a measurement, whilst in the start screen it is possible to quickly
change the measuring aperture - without entering the menu functions - from the
current 6 mil, to 8 mil, to 10 mil and then back to 6 mil, by pressing the
<6>
button
multiple times in succession.
When activated the user management
: Button
<8>
A user can log in by pressing the
<8>
button.
Exit the GUI
: Button
<9>
Press
<9>
button to exit the GUI.
