REA ScanCheck 3n, Руководство пользователя

Страница: 35 / 116

Operating Manual Page 35 / 116 Copyright © REA Elektronik
REA ScanCheck 3n
V 1.2.0 24/02/2020
REA VERIFIER
4.
Please wait for the ScanCheck 3n to restart (approx. 6 minutes). The device can restart in
the middle of the update procedure and resume the update. Once the update is complete, a
restart also takes place and the device then enters normal operating mode again.
5.
Recalibrate the ScanCheck 3 device for 6 mil and 20 mil.
3.7.2 Updating the device from the USB stick with text console
Perform step 1 and step 2 as described in 3.7.1
3. Start text console

<ON> button

Button<4> (terminate GUI)

Set the cursor to OK and confirm with the <OK ENTER> button


The device now displays a black screen with white text.
4. Start update

Button <6>

Confirm with the <OK ENTER> button
5.
Please wait for the ScanCheck 3n to restart (approx. 6 minutes). The device can restart in
the middle of the update procedure and resume the update. Once the update is complete, a
restart also takes place and the device then enters normal operating mode again.
6.
Recalibrate the ScanCheck 3 device for 6 mil and 20 mil.
3.7.3 Updating the device with the Service Tool
1.
Switch on the ScanCheck 3 device.
Close sleep mode / low power mode in the Scancheck 3n

<Set-up> button

Button <3> (settings)

Button <4> (device configuration)

Button <1> (operating modes)

Deactivate the menu item
“sleep/shutdown automatically”

Confirm with the <OK ENTER> button
2. Connect the ScanCheck 3n with the PC.
3.
From the CD
or download area: In Setup.exe, go to “Current Verifiers”, then “SC3 Update”.
Now press the “SC 3 Update” button. The “ServiceTool” program is now started. The correct file for
the update has already been selected: