Polycom MGC Administrator, Руководство администратора

Страница: 375 / 584

MGC Administrator’s Guide
5-139
Faults Alert
You can set the operator workstation to beep continuously whenever a fault is
detected. The system stops beeping only once the fault is corrected. By
default, this option is disabled.
To enable continuous beeping whenever a fault exists:
On the Options menu, click Beep on faults .
To check whether the option is currently active, open the Options menu, and
verify that a check mark appears next to the Beep on faults menu item.
In this case, the feature is currently enabled. If there is no check mark next to
the
Beep on faults menu item, the feature is disabled.