Polycom MGC Administrator, Руководство администратора

Страница: 465 / 584

MGC Administrator’s Guide
7-57
4. In the To H.323 Session Profile drop down list, select the Session Profile
to be used with this Routing Service. The Session Profile defines the call
parameters, such as the line rate, Restricted yes/no, Transcoding, yes/no
or when required, and whether the call is an Audio Only call. In addition,
it defines the Network Service that will be used to route the call from the
MCU to the destination endpoint.
5. In the First Dial-in Number drop down list, select the first dial-in number
in the range of dial-in numbers that will be allocated to the Routing
Service being defined.
6. In the Last Dial-in Number drop down list select the last dial-in number
in the range of dial-in numbers that will be allocated to the Routing
Service being defined.
7. Click the Apply button.
8. Repeat steps 3 to 7 to define additional Routing Services with their
appropriate dial-in number ranges.
The appropriate Routing Services are added to the
From H.320 Routing
Services dialog box, in the Routing Services table.
Defining Routing Services Properties
Once you have assigned a Routing Service to a dial-in numbers range, you
need to define the details of the Routing Service.
The selection of H.323 Destinations as the Routing Service requires no
additional setting. However, you can define a conversion table in which the
DID numbers are assigned the aliases with which the endpoints register.
Create a conversion table when the endpoints are assigned aliases different
from DID numbers. The conversion may be defined for specific or all
endpoints. The table displays the list of entries already defined for the
selected Routing Method. The table can be sorted according to any of the
columns. The columns will display the parameters defined in the
Address
Book or Forwarding Service dialog box.