Polycom MGC Administrator, Руководство администратора

Страница: 256 / 584

Chapter 5 - MCU System Management
5-20
2. You may save the Faults report to a text file. To do so, click the Save to
file button.
Category (cont.)
• General - indicates general faults.
• Assert - indicates internal software errors that are
reported by the software program.
•
Startup - indicates errors that occurred during
system startup.
Level Indicates the severity of the problem. There are three
fault indicators:
•
Major Error
• Minor Error
• System Message
• MCU Startup indicator
The icon of the fault Level appears in the Time
column.
Code Indicates the code of the problem, according to the
fault category. A list of codes per category can be
found in Appendix B.
Description When applicable, displays a more detailed
explanation of the cause of the problem.
If the High Bit Rate flag in the “system.cfg” is set to Yes , and the MCU contains
video cards of a version older than 1.43, the MCU status changes to Major and
an appropriate error message is added to the Faults log. The video card that
does not support the High Bit Rate is pulled out from the available resources list
and it is not used to run conferences.
If the
High Video Frame Rate flag in the “system.cfg” is set to Yes , and the MCU
contains video cards of a version older than 1.43, the MCU status changes to
Major and an appropriate error message is added to the Faults log. The video
card that does not support the High Frame Rate is pulled out from the available
resources list and it is not used to run conferences.
Table 5-7: Faults Columns (Continued)
Field Description