Polycom MGC Administrator, Руководство администратора

Страница: 266 / 584

Chapter 5 - MCU System Management
5-30
The file that is created contains the following details:
• Date and time of the exception
•
MCMS software version number (allocated for internal use)
•
Trace of the exception, as it already exists in the system
• Content of the stack
The stack’s content is a sequence of DWORDs in HEX format (as it is shown
in the debugger). The address of the first DWORD is printed at the beginning
of each line.
The exception files are kept on the MCU in the directory: c:\mcu\exceptns.
This directory is created when the first exception occurs. If another exception
occurs during a new lifetime of the MCU, the new exception file will be
added to the same directory. Each exception file created by the system is
named exceptns_n.txt, where n is the sequential number between 0 to 9. The
first file starts with 0 and is named exceptns_0.txt. The c:\mcu\exceptns
directory can hold a maximum of 10 files (the 10
th
file is named
exceptns_9.txt). When the directory is full (10 files are stored), and another
exception occurs, the oldest file will be overwritten by the new exception file
in a cyclic order.