Polycom MGC Administrator, Руководство администратора

Страница: 329 / 584

MGC Administrator’s Guide
5-93
Confer.cfg Flags
Section AUTO_REDIAL
•
NUM_REDIAL_TIMES = 3
The number of times the system redials when a participant is
disconnected.
•
REDIAL_INTERVAL_IN_SECS = 30
The interval between system redial attempts when a participant is
disconnected.
Section AUTO_EXTENSION
The end time of a conference can be automatically extended without operator
intervention. The following parameters are defined at the MCU level and they
apply to all the conferences that will be run on this MCU. Whether the
automatic extension of conference duration will apply to a specific
conference is determined by enabling the End Time Alert Tone, in the
Conference Properties – Settings dialog box.
• ENABLE_AUTO_EXTENSION
Defines whether the automatic extension is enabled and if it can be
applied to conferences. Select
YES to enable the auto extension mode
for conferences, or NO to disable it.
•
MAX_EXTENSION_TIME
The maximum accumulative number of minutes to be added to the
predefined conference duration. For example, if the conference duration
is set to 3 hours and this flag is set to 45 minutes, the total number of
minutes that can be added to a conference (in multiples defined in the
Extension Time Interval field) is 45 minutes, totaling a conference
duration of 3 hours and 45 minutes.
•
EXTENSION_TIME_INTERVAL
The number of minutes that the conference will be extended by each time
the system checks and identifies that at least one participant is still
connected to the conference.
Section SPEAKER_CHANGE
• SPEAKER_CHANGE_TIME_INTERVAL = 0
The amount of time a speaker is displayed before the system starts
checking if there is a new speaker. The minimum time that a speaker has