Polycom MGC Administrator, Руководство администратора

Страница: 301 / 584

MGC Administrator’s Guide
5-65
ignore pings. For more information about Silent Mode see, “XPEK
Silent Mode” on page 5-34.
Section SNMP
• SNMP = NO
Enables SNMP for the MCU system.
• SNMP_TRAP_LEVEL = MINOR
Define Trap level settings according to the type of severity: MAJOR,
MINOR, NEVER. For more information about Traps see “Status Trap
Content” on page 5-43.
•
SNMP_TRAP_INTERVAL = 60
Defines the interval in seconds between each trap. For more information
about Trap Intervals see, “Status Trap Timer” on page 5-43.
Section MCU_CLOCKING
Defines the clock source type on the MCU, only one clock source per system
is possible, when more than one clock source is defined, the ISDN clock is the
default. Four types of clock sources can be implemented on MCU:
•
ISDN_CLOCK = YES
•
ATM_CLOCK = NO
• INTERNAL_CLOCK = NO
• MPI_CLOCK = NO
•
SYSTEM_NORMAL_WITH_SINGLE_CLOCK_SOURCE = YES
Set to this flag to YES allowing the MCU's status to be NORMAL, even
if there is only a single clock source.
Section LAN
•
DRIVER_SMC = NO
The controller auto detects the NIC card type, when a fault is detected
the default (flag value = NO) is implemented: NO = SMC Driver,
YES = 3COM or Intel Driver.
Section WATCH DOG
•
WATCH_DOG=YES
Enables an automatic MCU reset when the MCMS crashes.