Polycom MGC Administrator, Руководство администратора

Страница: 155 / 584

MGC Administrator’s Guide
3-105
9. Click Next to continue.
CTS Delay The CTS (Clear To Send) delay indicates when to
start synchronizing with the clock signals sent from
the DCE. Some DCEs send a CTS signal before the
channels are BONDED. In these cases, a delay
should be entered.
RTS Delay Delay between DTR (Data Terminal Ready) active
and RTS (Request to Send) active. Usually, it will be
set to 0 (zero), but some DCE equipment may require
a delay between the activation of these signals.
KG Mode Select this check box when an encryption device is
used.
CTS On Select this check box when the DCE does not return
the
Clear to Send signal as expected. When this
option is checked, the MCU sends the data to the
DCE without waiting for the CTS signal from the
DCE. When On, the signal is sent continuously.
RTS On Select this check box when the endpoint does not
return the
Request to Send signal as expected. In
such a case, the DCE will get the RTS signal and will
return the clock and required signals from the
endpoint. When On, the signal is sent continuously.
DTR On Select this check box when the endpoint does not
return the
Data Terminal Ready signal as expected.
In such a case, the DCE will receive the DTS signal
and will return the clock and required signals from the
endpoint. When On, the signal is sent continuously.
Table 3-31: MPI Settings Dialog Box Options
Field Description