Polycom MGC Administrator, Руководство администратора

Страница: 503 / 584

MGC Administrator’s Guide
A-7
NO
_
DUAL
_
SLOT
_
MASTER
_
VIDEO
_
CARD
major Applicable to dual video cards. The video
card is identified as master but there is no
Slave video card identified. Removing the
Slave card may be the cause. Check if the
card is indeed a dual card. If it is, consult
your service engineer. If there is no dual
card you may reset this card.
NO
_
DUAL
_
SLOT
_
SLAVE
_
VIDEO
_
CARD
minor Applicable to dual video cards. The video
card is identified as slave but there is no
Master video card identified. Removing
the Master card may cause this. Check if
this is indeed a dual card. If it is, consult
your service engineer. If there is no dual
card, you may reset this card.
NOT
_
ATTENDED
_
HARDWARE
_
VERSION
major Card software does not support attended
conferences when the MESSAGE flag in
the GREET AND GUIDE/IVR section of
the “system.cfg” is configured to
YES .
RED
_
ALARM
major The local span failed to identify the line.
Check the connection between the net
span and the PBX.
UNEXPECTED
_
CARD
_
TYPE
major The card in this slot is of a different type
than expected.
For example, this may happen if a card of
a one type physically replaces a card of
different type. If this is the case, use the
operator to remove the card and then
reset the card slot.
UNEXPECTED
_
EMPTY
_
SLOT
major An empty slot was encountered where a
card was expected. This will be caused if
a card is physically removed without
removing it in the MGC Manager as well.
UNIT NOT RESPONDING
major Unit is not responding to requests due to a
card component fatal error
Table A-4: Card Fault Descriptions (Continued)
Code Level Description