Polycom MGC Administrator, Руководство администратора

Страница: 32 / 584

Chapter 2 - Software Installation
2-14
10. Click Send .
The MCU validates the certificate.
— If the certificate is not valid, an error message appears.
— If the certificate matches the private key, and the task is completed, a
confirmation message indicating that the certificate was created
successfully is displayed.
11. Reset the MCU.
The system has access to the SSL-secured port 443.
If the preferred port or preferred secured port differs from the currently
connected port, then the system disconnects and reconnects using the
preferred port or the preferred secured port, and replaces the Port
Number with the preferred port or preferred secured port.
To enable a Mandatory and Secure connection to the MCU:
1. Before connecting the MCU, right-click the MCU icon and click MCU
Utils , then click Edit “system.cfg” .
The SysConfig dialog box opens.
2. In the GENERAL section, set the following flags:
— SECURED_PORT_MANDATORY_FOR_API=YES
—
SECURED_PORT_MANDATORY_FOR_FILE=YES
—
PREFERRED_SECURED_PORT=443
3. Click OK and then reset the MCU.
4. Right-click the MCU icon and then click Properties .
The Properties dialog box opens.
Do not connect to the MCU. When you right-click the MCU, the MCU should be
disconnected and the icon appear grey.