Polycom MGC Administrator, Руководство администратора

Страница: 456 / 584

Chapter 7 - Configuring the Gateway
7-48
Defining and Viewing the Endpoint Address Book
The Address Book contains a list of endpoint. The list displays the
information defined in the Endpoint Definition dialog box. The Address Book
may be used for speed dialing when dialing from H.323 to H.320 or H.323.
The Address Book is used to define the characteristics of an endpoint, and
then associate it with either an H.323 ID or an H.320 DID, or both, depending
on how you wish to reach a party. When dialing from H.320 to H.323, a DID
number will be assigned to the endpoint. The DID Number will be taken from
the DID number (if any) assigned to this endpoint defined in the Routing
Service Definition dialog box.
To view or add an endpoint address:
1. Double-click the Gateway Configuration icon or click the plus [+] icon
next to the Gateway Configuration icon to list its options.
2. Double-click the Address Book icon or right-click the Address Book icon
and then click Properties .
Audio Only Select this check box if the gateway session should
be run using audio only (without video). When
cleared, video can be used during the conference.
Restrict Only Select this check box if one of the endpoints is using
restricted lines. The line rate for each channel of
restricted lines is 56 Kbps instead of 64 Kbps.
Encryption Select this check box if encryption is to be used.
Table 7-6: To H.323 Session Profile Definition options (Continued)
Field Description