Polycom MGC Administrator, Руководство администратора

Страница: 299 / 584

MGC Administrator’s Guide
5-63
• CARD_STARTUP_TIMEOUT = 420
Defines the maximum time allowed for the card startup, after which the
card’s status is changed to 'NO_CONNECTION_WITH_CARD'.
• CARD_STATUS_REQUEST_TIMEOUT = 10
Determines in seconds the frequency of sending a card status request.
• AUTO_VIDEO_PLUS_LOGGER = YES
Set to YES to enable the Auto Video Plus logger. When a Video+ unit
failure occurs, a VideoPlus log file is automatically created.
•
AUTO_IP_CARD_MONITOR
This flag may be set to one of the following options:
—
NO (no automatic monitoring - only manual monitoring is
available)
—
UNIT (traces will be automatically saved for each unit failure)
— CARD (traces will be automatically saved for each card failure)
If Unit or Card are selected, a file containing the trace information for
each failure will be created using the name format crdmn_nn.txt, where
nn is a number between 00 and 19. The files are created sequentially,
cyclically, when the 20th file overwrites the first file and so on.
Recommended mode is NO (manual card monitor). For more
information see “IP Card Diagnostic Files” on page 5-111.
•
RTP_SELF_RECOVERY = YES
Self Recovery is an automatic process performed by the Card Manager
processor resulting in a reset of the H.323 card. When the card resets, the
participants are not disconnected, and their video and audio are restored
within 10 seconds.
• MAP_SELF_RECOVERY = YES
Map Self Recovery is performed by the Card Manager processor
resulting in changes in the Video+ unit. When the unit resets, the
participants are not disconnected, and their video and audio are restored.
Section ALARMS
•
EXT_ALARM=NO
This flag enables the optional external alarm on the MCU. In case of an
(Minor, Major) alarm on the system, a circuit activates the alarm on the
MCU.