Polycom MGC Administrator, Руководство администратора

Страница: 171 / 584

MGC Administrator’s Guide
3-121
The ATM Phone Numbers dialog box opens.
14. Enter the range of numbers that can be used in the dial-in connection.
In the First Phone Number box, enter the first number in the range of
dial-in numbers.
In the Last Phone Number box, enter the last number in the range of dial-
in numbers.
15. Click OK .
The system returns to the New ATM Span dialog box displaying the new
phone numbers.
To remove a phone number range, select the range in the Dial In Phone
Num pane, and then click the Minus button.
The dial-in numbers should also be defined in the V-Gate, assigning
them the UNI number of the ATM card installed in the MCU. This is
done at the end, once the circuit order is assigned to the appropriate Span
in the card configuration.
16. Click OK .
The system returns to the Spans and Phones dialog box.
17. Click the Finish button.
The new ATM service is added to the ATM services list in the Browser
pane of the MGC Manager main window.
•
The range of dial-in numbers should not exceed 1000 numbers. For
example: from 2000 to 2999.
•
It is recommended to define a separate range for dial-in numbers using ISDN
services and those using ATM service. For example, 2000 to 2999 for ATM
dial-in numbers and 5000 to 5999 for ISDN dial-in numbers.