Polaris RANGER CREW 900 2014, Руководство пользователя

Страница: 92 / 447

3
9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
© Copyright Polaris Sales Inc.
3.35
ENGINE BREAK-IN PERIOD
The break-in period consists of the first 25 hours of
operation. Careful treatment of a new engine and drive
components will result in more efficient performance and
longer life for these components.
CAUTION
Use only Polaris PS-4 or PS-4 Extreme Duty Synthetic
4-Cycle Engine Oil.Never substitute or mix oil brands.
Serious engine damage and voiding of warranty can
result. Do not operate at full throttle or high speeds for
extended periods during the first three hours of use.
Excessive heat can build up and cause damage to
close fitted engine parts.
1. Fill fuel tank with unleaded fuel which has a minimum
pump octane number of 87 = (R+ M)/2.
2. Refer to Chapter 2, “Engine Oil Level”. Check oil
level indicated on dipstick. Add oil if necessary.
3. Drive slowly at first to gradually bring engine up to
operating temperature.
4. Vary throttle positions. Do not operate at sustained
idle or sustained high speed.
5. Perform regular checks on fluid levels, controls and
all important bolt torques.
6. Change oil and oil filter after 25 hour break-in period.
ENGINE LUBRICATION SPECIFICATIONS
FLUID CAPACITY
Oil Capacity *
Approx. 2.5 Quarts (2.4 L)
Oil Filter Wrench
PU-50105 or 2.5” (64 mm)
Oil Filter
PN 2540086
Oil Type Ambient Temp Range:-35° F to 100° F
PS-4 Synthetic Engine oil(PN 2876244) (Quart)
Oil Type Ambient Temp Range:0° F to 120° F
PS-4 Extreme Duty Synthetic Engine Oil (PN 2878920)
(Quart)
Oil PressureMinimum Specification (using Polaris
engine oil at operating temperature)
10 PSI @ 1200 RPM
40 PSI @ 7000 RPM
*Additional oil may be required after complete
engine disassembly. Check level after filling and add
oil as needed.
ENGINE