Polaris RANGER CREW 900 2014 Скачать руководство пользователя страница 182

Страница: 182 / 447

9924880 Rev 2- 1/10/2014 - 2013 / 2014 RANGER XP 900 - 2014 RANGER XP 900 / CREW 900 Service Manual
© Copyright Polaris Sales Inc.

4.33

10. Pull out on the fuel injector retaining clip and pull the

injector out of the fuel rail. Repeat on the other
injector if removal is necessary.

11. Upon installation of the new fuel injectors, lightly

lubricate the injector O-rings to aid installation.

12. Install the new injector (s) into the fuel rail and

reinstall the retaining clip.

NOTE

Be sure the retaining clip is positioned on the injector

and fuel rail as shown above.

13. Thoroughly clean the area around the fuel injector

ports on the intake plenum.

14. Lightly lubricate the injector O-rings and reinstall the

fuel rail / injector assembly into the intake plenum.

15. Install the fuel rail mounting screws and torque to

specification.

TORQUE

Fuel Rail Mounting Screws:

7 ft-lbs (10 Nm)

16. Reinstall the fuel line to the fuel rail.

17. Connect the harness leads to the fuel injectors.

NOTE

Be sure to connect the PTO harness lead to the PTO

injector and the MAG harness lead to the MAG injector

to ensure proper engine operation.

18. Reconnect the negative battery cable and reinstall

the storage bin and passenger seat base.

19. Turn the key to the on position and wait for fuel pump

to prime the fuel system.

20. Start the engine briefly and inspect the fuel rail and

injectors for fuel leaks.

FUEL SYSTEM - GENERAL

Содержание RANGER CREW 900 2014
































































































































































































































































































































































































































































Результаты поиска

Содержание RANGER CREW 900 2014

Отзывы:

Похожие инструкции для RANGER CREW 900 2014

Бренды по названию

Популярные бренды

Polaris RANGER CREW 900 2014, Руководство пользователя

Результаты поиска

Содержание RANGER CREW 900 2014

Отзывы:

Похожие инструкции для RANGER CREW 900 2014

Бренды по названию

Популярные бренды