Panasonic LP-RH Series, Руководство по установке и обслуживанию, Страница: 5 / 240

5
WARNING
• Remove the dust and/or gas which may be generated during the laser radiation with dust collector or
exhauster. Use an appropriate dust collector or exhauster for dust or gas generated.
Depending on the material of the objects, harmful dust and/or gas to the human body and the laser marker
may be generated.
• For a nozzle of a dust collector or exhauster, use a flame-resistant material which has low reflectivity. Do
not place a nozzle in the path of the laser beam.
Protective
enclosure
Dust collector
• When using the assist gas for laser processing, take safety precautions to protect operators from
exposure, ignition, toxic effect, excess or lack of oxygen.
• To carry this product, wear the non-slip gloves. Hold the product with both hands. Do not hold the cables
or connectors at carrying.
• To carry this product, do not hold the cut edges of metal parts, the protrusions or corners of the product
body. It may cause injury.
• Install this product in the stable place without vibration and shock.
• In case it falls down, it may cause injury.
The following are safety precautions when using the touch panel console.
WARNING
• Never conduct wiring or maintenance work with wet hands or when the product surface is wet. Otherwise,
electric shock and/or malfunction may result.
CAUTION
• Do not dismantle or remodel the product. It could lead to excessive exothermic heat or smoke generation.
• Since the touch panel is made of glass, care should be taken so that a hard object may not hit it or an
excessive force should not be applied. Do not fall the product from a high place because there is a danger
of the glass breaking and causing an injury.
• Do not press more than one point on the touch panel at a time. A switch located in the middle of the plural
points pressed (that was not meant to be pressed) will be activated. It could lead to a damage to the facility
or an accident.
ME-LPRH-SM-3