manualshive.com logo in svg

Panasonic LP-RH Series, Руководство по установке и обслуживанию, Страница: 175 / 240

Поделиться
Скачать
Panasonic LP-RH Series Скачать руководство пользователя страница 175

175

 

„

Cleaning steps for laser emission port (Daily maintenance)

In order to maintain stable marking quality, the laser emission port needs to be cleaned regularly according to the usage 

environment.

1. 

Turn OFF the key switch of the controller, and disconnect the AC power cable.

2. 

Clean the laser emission port with an air duster for optics, and wipe it lightly with a soft 
cloth. If a contamination is severe, use a soft cloth immersed in ethanol to wipe it.

ワㄐㄕㄊ㄄ㄆ

•  Do not wipe the laser emission port strongly, or touch it with a sharp pointed object. 

Laser marker might become faulty.

WARNING

•  Never use an inflammable air duster. The laser beam may ignite the gas, 

resulting in fire. 

3. 

If you want to manage the maintenance history, update the maintenance information in Laser Marker NAVI smart.
Go to the "Runtime data" tabs on the "Maintenance" screen in Laser Marker NAVI smart, and select "Done" on "Laser 

emission port cleaning" on the announcement for regular maintenance.
The date and time when you selected "Done" is registered in "Last maintenance".

Laser emission port

Soft cloth

ME-LPRH-SM-3

Содержание LP-RH Series

















































































































































































































































Отзывы:

Нет отзывов