Panasonic LP-RH Series, Руководство по установке и обслуживанию, Страница: 118 / 240

118
Item Time Remarks
T1 Approx. 10 sec. Time for system startup. Turn ON the remote mode upon verifying SYSTEM STANDBY
OUT (Y7).
T2 Approx. 5 sec. Time for completion of laser pumping.
• At the usual operation: Approx. 5 sec.
• Re-pumping right after turning the laser pumping OFF: Max. 10 sec.
T3 Max. 1 sec. There is a delay time of around 200ms to max. 1 second from turning ON/OFF of
SHUTTER IN (X8) to turning ON/OFF of SHUTTER CLOSE 1 OUT (Y8) and SHUTTER
CLOSE 2 OUT (Y9).
T4 ― Setup time of the laser marker to start the marking trigger processing.
• In the laser pumping completed state: Total time for shutter opening (T3) and marking
data creation. It varies depending on the quantity of the setting data.
• When the laser pumping is not completed: Total time for shutter opening (T3) and
marking data creation, or time for laser pumping, whichever is longer.
T5 2ms or more Keep the ON status for 2ms or more.
T6 ― When TRIGGER IN (X5) is accepted, PROCESSING OUT (Y10) turns ON. The output time
of PROCESSING OUT (Y10) includes the trigger delay time, marking preparation time,
laser radiation time, and processing time after marking has completed.
T7 2 to 510ms One-shot output. Set the output time on the environment setting screen.
There is a small margin of error for the setting value.
ME-LPRH-SM-3