Panasonic LP-RH Series, Руководство по установке и обслуживанию, Страница: 24 / 240

24
„
Laser marker controller
□
Laser marker controller
1 unit
□
System key
□
Unit power cable
(5m)
□
Signal cable (5m)
□
I/O connector
qty.: 2 qty.: 1 qty.: 1 qty.: 1
□
I/O terminal block
□
Jumper wire
□
USB cable for Laser
Marker NAVI smart
(2m)
□
Ferrite core
□
Package contents
qty.: 1 qty.: 7 qty.: 1 qty.: 3 *1 qty.: 1
*1: Attach one ferrite core to the LAN cable (Ethernet), one to the I/O lines from the I/O terminal, and one to the I/O lines
from the I/O connector.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• The AC power cable is not included in this product. Use the specified optional cable or a cable with the enough rating
capacity to fulfil the power voltage specification of this product, which is compliant with the regulations and standards
in the country or region where it is used. For the optional cables, refer to “1-4-3 Cables” (P.32).
• Download the software and PDF manual necessary to set the laser marker from our Internet website. Refer to “1-2-4
Download software and manual” (P.25).
ME-LPRH-SM-3