Panasonic LP-RH Series Скачать руководство пользователя страница 10

Страница: 10 / 240

Related Regulations and Standards

Applicable regulations and standards

This product meets the requirements mandated by the following regulations and standards.

Note that our products do not conform to the regulations and standards of the countries and regions not mentioned in this

section. When exporting this product by itself or integrated into machine or device, confirm the regulations and standards of

the exporting country or region.

Model

Applicable regulations and standards

LP-RH300S

LP-RH300T

LP-RH301S

LP-RH301T

LP-RH305S

LP-RH305T

LP-RH200S

LP-RH200T

LP-RH100S

LP-RH100T

LP-RH101S

LP-RH101T

JIS (Japanese Industrial Standards)

• JIS C 6802

FDA (Food and Drug Administration) Regulations

• 21 CFR 1040.10 and 1040.11 (except for conformance with IEC 60825-1 Ed. 3, as described in

Laser Notice No. 56 dated May 8, 2019)

UL/CSA Standard (UL/CSA Marking)

• UL 2178

• UL 60950-1

• CSA C22.2 No. 60950-1

EN Standard (CE Marking)*1

• 2014/30/EU “EMC Directive”

• EN 55011

• EN 61000-6-2

• 2006/42/EC “Machinery Directive” (for partly completed machinery)*2

• EN ISO 11553-1

• EN 60204-1

• 2011/65/EU as amended by (EU)2015/863 “RoHS Directive”

• EN IEC 63000

• Technical specification

• EN 55032

• EN 60825-1

EN Standard (UKCA Marking) *3

• 2016 No. 1091 “Electromagnetic Compatibility Regulations 2016”

• EN 55011

• EN 61000-6-2

• 2008 No. 1597 Supply of Machinery (Safety) Regulations 2008 (for partly completed machinery)

• EN ISO 11553-1

• EN 60204-1

• 2012 No. 3032 “Restriction of the Use of Certain Hazardous Substances in Electrical and

Electronic Equipment Regulations 2012”

• EN IEC 63000

• Technical specification

• EN 55032

• EN 60825-1

GB (Chinese National Standard)

• GB 7247.1-2012 (idt IEC 60825-1: 2007)

*1 : Authorized Representative in EU:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

*2 : The printed copy of EU declarations of conformity “EU Declaration of Incorporation of Partly Completed Machinery” is

included in the package of this product.

*3 : UK Address:

Panasonic UK, a branch of Panasonic Marketing Europe GmbH

Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT

*4 : The printed copy of UK declarations of conformity “UK Declaration of Incorporation of Partly Completed Machinery” is

included in the package of this product.

ME-LPRH-SM-3

Содержание LP-RH Series

















































































































































































































































Результаты поиска

Содержание LP-RH Series

Отзывы:

Panasonic LP-RH Series, Руководство по установке и обслуживанию, Страница: 10 / 240

Результаты поиска

Содержание LP-RH Series

Отзывы: