Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 131 / 180

131
⿎ CO
2
laser frequency : MPL
[Supported models: LP-400 series]
Sets the laser frequency of LP-400 series.
• Setting / Readout data of laser frequency
STX MPL
Sub
command
[Laser frequency]
1-byte
(Check
sum)
Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of laser frequency
STX MPL R (Check sum) Delimiter
Name
Data
length
[byte]
Description Remarks
Laser frequency 1
“0”: 5 kHz
“1”: 10 kHz
“2”: 20 kHz
⿎
Line width/marking pitch : WDC
Sets the width necessary to avoid crossing at marking intersection and marking pitch of the bold characters and bar code.
• Setting / Readout data of line width and marking pitch
STX WDC
Sub
command
[Line width] [Marking pitch]
10-byte
(Check
sum)
Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of line width and marking pitch
STX WDC R (Check sum) Delimiter
Name
Data
length
[byte]
Description Remarks
Line width 5 “0.010”–“2.000” [mm]
The line width for crossing avoidance at the crossing
point of marking line is indicated.
Marking pitch 5 “0.010”–“2.000” [mm]
Sets the marking pitch of the bold characters and bar
code module.
ME-LP400V-EX-6