Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 124 / 180

124
Name
Data
length
[byte]
Description Remarks
Character
height
7
Model type* Setting range [mm]
LP-V10 “000.100”–“090.000”
LP-4x0 “000.100”–“110.000”
LP-4x5/LP-V15 “000.100”–“160.000”
LP-4x1/LP-W
“000.100”–“055.000”
Character width 7
Center position
X
8
“-300.000”–“+300.000” [mm] The center coordinate for arc is indicated.
Center position
Y
8
Radius 8 “+000.000”–“+300.000” [mm]
Radius of line
interval
7
Model type* Setting range [mm]
LP-V10 “000.000”–“090.000”
LP-4x0 “000.000”–“110.000”
LP-4x5/LP-V15 “000.000”–“160.000”
LP-4x1/LP-W
“000.000”–“055.000”
The difference of radius from the center position
of marking position to the next line is indicated
when the character string is marked over two or
more lines.
Start angle 7 “-180.00”–“+180.00” [°]
The angle from the positive (+) side of X
coordinate with counter-clockwise at the first
character in character string for marking is
indicated.
Angle of
character
interval
7 “-180.00”–“+180.00” [°]
The angle between the center of character and
the center of next character is indicated.
Font No. 1
“1”: character font 1
“2”: character font 2 The number corresponding to the 2 fonts
previously registered is indicated.
Bold line width 5
Model type* Setting range [mm]
LP-V10/LP-W “0.000”–“2.000”
LP-4x1/LP-V15 “0.000”–“4.000”
LP-4x0/LP-4x5 “0.000”–“6.000”
Laser power
correction
3 “000”–“200” [%]
• The correction ratio is calculated using the
value set at the laser setting as 100%.
• With LP-400/LP-W series, nothing should be
input in Laser Pulse Cycle Correction.
Scan speed
correction
3 “005”–“500” [%]
(Laser
pulse cycle
correction)
(Only for LP-V
series)
(3) “050”–“200” [%]
* For the detail of the model type, refer to “Target laser marker” (P.8).
Reference
• At marking of bold characters, set the values so ratio of character height to character width be within 1/4 to 4.
• Set the Bold Line Width to 1/4 or less of the character height or the character width, whichever is smaller.
ME-LP400V-EX-6