Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 47 / 180

47
2-4-2 Marking trigger input
ON
OFF
ON
OFF
ON
OFF
ON
OFF
T1 T1
T2
READY OUT
MARKING OUT
TRIG. IN
WARNING OUT
(Active low)
Item Time Remarks
T1 10ms or more Keep the ON status for 10ms or more.
T2 2 to 510ms It outputs a warning to notify that an invalid trigger was input when a marking trigger was
input during the marking operation. This is One-shot output. You can turn this warning off
by the settings.
Reference
• The marking is started when TRIG. IN is turned to ON while either the delay time or delay distance is 0.
2-4-3 Equidistant marking (Flying object marking)
ON
OFF
ON
OFF
ON
OFF
ON
OFF
T2 T2 T2
T3 T3 T3 T3
T1
READY OUT
TRIG. IN
MARKING OUT
MARK END OUT
Item Time Remarks
T1 ― The time when the work travels the distance set in the “trigger delay”.
T2 ― The time when the work travels the distance set in the “interval” of the moving object.
T3 2 to 510ms One-shot output. Set the output time on the environment setting screen. There is a small
margin of error for the setting value.
Reference
• Equidistant marking is performed while TRIG. IN is ON.
• The laser marker stops after marking is completed if TRIG. IN is turned to OFF during marking.
• Equidistant marking is performed after travels the distance that is set in the “trigger ready”.
ME-LP400V-EX-6