Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 85 / 180

85
⿎ Marking character string (ASCII code specified) : MCS
Sets the marking character string by ASCII code. (For alphanumeric and symbols only)
• Setting / Readout data of marking character string
STX MCS
Sub
command
[Line No.] [Marking character string]
Max. 32-byte
(Check sum) Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of marking character string
STX MCS R
[Line No.]
2-byte
(Check sum) Delimiter
Name Data length [byte] Description Remarks
Line No. 2 “01”–“60” [row] “51”–“60”: common setting lines
Marking
character string
Max. 30
Characters within the range from
20(HEX) to 7E(HEX) of ASCII code
(functional characters should not be
included)
Specify 0 byte to the character string to
be deleted.
Reference
• If readout data includes function characters (such as “%SFT:0”), the setting character (“%SFT:0”) is read out, but
characters to be actually marked are not.
• If readout data includes characters that cannot be expressed in ASCII code such as Katakana and Kanji (2-byte
character), only these 2-byte characters are read out in shift-JIS code. In this case, the maximum readout data will be
32-byte or more.
⿎ Marking character string (Shift-JIS code specified) : STR
Sets the marking character string by shift-JIS code. (For characters including KANA, KANJI and function characters)
• Setting / Readout data of marking character string
STX STR
Sub
command
[Line No.] [Marking character string]
Max. 62-byte
(Check sum) Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of marking character string
STX STR R
[Line No.]
2-byte
(Check sum) Delimiter
Name Data length [byte] Description Remarks
Line No. 2 “01”–“60” [row] “51”–“60”: common setting lines
Marking
character string
Max. 60
The character string (Up to 30 characters)
to be set in the specified line is specified
with shift-JIS code.(However, the function
character should be specified by ASCII
code.) Specify 0 byte to the character string
to be deleted.
See the next page.
ME-LP400V-EX-6