Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 120 / 180

120
⿎ General condition : ALC
Sets the conditions related to whole file.
• Setting / Readout data of general condition
STX ALC
Sub
command
[X offset] [Y offset] [Rotation offset]
[Overwriting frequency] [Overwriting interval]
[Mirror (Y axis symmetry)] [Flip (X axis symmetry)]
[Kerning]
Max. 31-byte
(Check
sum)
Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
• Readout request of general condition
STX ALC R (Check sum) Delimiter
Name
Data length
[byte]
Description Remarks
X offset 8
Model type* Setting range [mm]
LP-V10 “-045.000”–“+045.000”
LP-4x0 “-055.000”–“+055.000”
LP-4x5/LP-V15 “-080.000”–“+080.000”
LP-4x1/LP-W “-027.500”–“+027.500”
Y offset 8
Rotation offset 7 “-180.00”–“+180.00” [°]
Overwriting
frequency
2 “01”–“99” [times]
Marking is repeated by the repeat
number set. When the marking on the
flying object is valid, set “01”.
Overwriting
interval
3 “0.0”–“9.9” [sec.] or “010”–“060” [sec.]
The interval period at overwriting
marking is set.
Mirror (Y axis
symmetry)
1
“0”: inversion OFF
“1”: inversion ON The character marked is inverted to the
Y axis.
Flip (X axis
symmetry)
1
“0”: inversion OFF
“1”: inversion ON The character marked is inverted to the
X axis.
Kerning
(omissible)
(1)
“1”: Level 1:
Minimize the origin point of the
character interval with this condition.
The character width such as “i” and “l”
(small letter “L”) is recognized as “0”.
“2”: Level 2:
Set the origin point of the character
with intermediate degree between the
character interval set with Level 1 and
Level 3. The character interval such as
“i” and “l” (small letter “L”) becomes 1/4
(fourth) of character width.
“3”: Level 3:
Maximize the origin point of the
character interval with this condition.
The character width such as “i” and “l”
(small letter “L”) becomes 1/2 (half) of
character width.
Specifies the balance of the character
interval when “Proportional” is set
to “Marking Shape” on the “Marking
Condition”.
* For the detail of the model type, refer to “Target laser marker” (P.8).
Reference
• When marking on the flying object is valid, Overwriting Function cannot be used.
ME-LP400V-EX-6