Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 103 / 180

103
7. For GS1 DataBar Expanded Stacked
(Including when this code is 1D part of the composite code.)
Data length : 56-byte (LP-V series), 53-byte (LP-400/LP-W series)
Name
Data
length
[byte]
Description Remarks
Bar code No. 1 “0”–“7”
Area No. 1 “0”–“9”, “A”–“F”
Specifies which area part is the
marking position of the concatenated
marking on the flying object.
In case of marking static object,
specify “0”
Code type 2
“35”: GS1 DataBar Expanded Stacked
“45”: GS1 DataBar Expanded Stacked CC-A
“55”: GS1 DataBar Expanded Stacked
CC-B
Human readable text 1
“0”: Invalid
“2”: Valid
Inversion 1
“0”: Do not invert
“1”: Invert
“2”: Invert with guard pattern
One bar code height 7
Model type* Setting range [mm]
LP-V10 “001.000”–“090.000”
LP-4x0 “001.000”–“110.000”
LP-4x5/LP-V15 “001.000”–“160.000”
LP-4x1/LP-W “001.000”–“055.000”
Separator height/(W) 4 “00.0”–“10.0”
Ratio of separation pattern height to
width.
Symbol char. in row 2 “02”–“20” Only even value applied
Number of Symbol Character in
lateral direction.
Module width 5 “0.050”–“1.000” [mm]
Set the larger value than “Line width”
in laser setting screen.
X position 8
Model type* Setting range [mm]
LP-V10 “-045.000”–“+045.000”
LP-4x0 “-055.000”–“+055.000”
LP-4x5/LP-V15 “-080.000”–“+080.000”
LP-4x1/LP-W “-027.500”–“+027.500”
Specifies the center coordinate of
the code.
Y position 8
Tilt angle 7 “-180.00”–“+180.00” [°]
Laser power
correction
3 “000”–“200” [%]
• The correction ratio is calculated
using the value set at the laser
setting as 100%.
• With LP-400/LP-W series, nothing
should be input in Laser Pulse
Cycle Correction.
Scan speed
correction
3 “005”–“500” [%]
(Laser pulse cycle
correction)
(Only for LP-V series)
(3) “050”–“200” [%]
* For the detail of the model type, refer to “Target laser marker” (P.8).
ME-LP400V-EX-6