Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 115 / 180

115
2. For circle (Data length: Max. 42-byte)
Name
Data length
[byte]
Description Remarks
Processing
condition No.
1 “0”–“7”
Processing
element No.
3 “000”–“031”
Element type 1 “1”: circle
Center X 8
Model type* Setting range [mm]
LP-V10 “-045.000”–“+045.000”
LP-4x0 “-055.000”–“+055.000”
LP-4x5/LP-V15 “-080.000”–“+080.000”
LP-4x1/LP-W “-027.500”–“+027.500”
Center Y 8
Radius 7
Model type* Setting range [mm]
LP-V10 “000.010”–“045.000”
LP-4x0 “000.010”–“055.000”
LP-4x5/LP-V15 “000.010”–“080.000”
LP-4x1/LP-W “000.010”–“027.500”
Dashed line:
Length of solid
part
(7)
Model type* Setting range [mm]
LP-V10 “000.010”–“090.000”
LP-4x0 “000.010”–“110.000”
LP-4x5/LP-V15
“000.010”–“160.000”
LP-4x1/LP-W “000.010”–“055.000”
Set the larger value than “Line width” in
laser setting screen.
To make it not dashed line (solid line),
input nothing.
Dashed line:
Length of blank
part
(7)
Model type* Setting range [mm]
LP-V10 “000.000”–“090.000”
LP-4x0 “000.000”–“110.000”
LP-4x5/LP-V15 “000.000”–“160.000”
LP-4x1/LP-W “000.000”–“055.000”
To make it not dashed line (solid line),
input nothing.
For deletion of the processing element, set the element type to straight line, and set X and Y coordinates of both start and
end points to “0”.
* For the detail of the model type, refer to “Target laser marker” (P.8).
ME-LP400V-EX-6